Overview

For Alarm Monitoring, Access Control Panel will allows user to arm and disarm alarm via authorize cards. The numbers of input can be cascaded from 8 input to maximum of 32 inputs through the use of 8 i/p module model cards. Alarm signals from PIR, door sensors, smoke detectors, infrared detector and any alarm sensors can be use to detect any security violation.

All the alarm signals are transfer via a network to Falco W eb access control software. The Falco W eb software with alarm handling module enabled, it will triggers the floor plans animations of alarms and at the same time it triggers the video live of a camera which is tide to the door. Each camera is settable to be tide with any existing door controls panel. There is a special screens filtered for guards to monitor only those alarms event required. W ith different logins, there can have different filtering screens. Alarm such as door force open or door left open can view by the guard easily and with video evidences.

Video evidence can be playback direct from the card access software. You do not need to acknowledge the date and time of the alarm from card access software and play the video evidence from others IP Video software. In the card access software, floor plans can be inserted to allocate animations doors.

Click Here To Enlarge

Architecture:

All access control panels, alarm control panels, IP Cameras are link back to the LAN network. The numbers of IP Camera depends on IP Video Software Licensing and one of the cameras would be configure to tide with one of the alarm control panel.

When the sensors from the alarm panel triggers, alarm signals are sent real-time through the LAN network and received by server. At the same times, camera which tide to the alarm panel will be prompt so that guard will have full attentions on the particular alarmed area.