The Falco IP Network DVR is act and function as a normal DVR. Beside that, it also able to link to the Falco IP Enterprise software to provide integration with the access controls software. Multiple Falco IP Network DVR can be cascade in a whole system. Maximum 16 Falco IP Network DVR able to link together and each camera point can be set to point at any 1 door. All the event on this door will be linked to the camera.

Falco IP Network DVR is runs on a 32-bit Super-fast microprocessor running at a blazing 2.8 GHZ speed. It has a built-in 100Mbps 100-base-T Ethernet LAN Interface Adapter, which handles communication to the server computer by using the TCP/IP Internet Protocol.

Falco IP Network DVR able to connects through LAN or WAN configuration. To further enhance efficiency, the Falco Enterprise Video software is used to manage the centralized control and monitoring of an integrated security system consisting of up to 250 Falco IP door controller and 16 Falco IP Network DVR. Each Falco IP Network DVR can also act as a standalone DVR where all the recording will be store within its own hard disk storage.

You can have all the standard DVR features that you need, Plus integration with access controls.

Feature

Network Ready
Falco IP Network DVR is a 'network-ready' control panel that connects easily to any TCP/IP network via an Ethernet port or hub of 10/100 Base-T. Any client computer in the network can then access Falco IP Network DVR to manage the CCTV surveillance and monitor video activity or Playback for review. 

PTZ Controls
Able to controls various model of Speed dome. More than 10 type of protocols available to be used to controls the speed dome. You able to remote controls through web browser or through Falco-Enterprise Video software as well. You will able to direct a speed dome to a preset location upon alarm or motion.

Object Searching or Counting
Able to search specific object or motion within a pre-defined area and provide alerts to the user or guard who monitored the system. Also able to count specified object size who entered into a pre-defined area. 

Digital Video Recorder (DVR) Integration
Cameras can be connected to Falco IP Network DVR for seamless activation of video recording or live viewing. This integrated DVR with Falco IP access control  system enables the users to have the ability to launch the video from transaction events of the access control system as located on Falco Enterprise Management software. Stored alarm video images can be playback by simple mouse clicks! Choice of 25, 100, 200 and 480 frame per second of recording rate. Remotely access to live and recorded video playback and full control of PTZ domes via Falco Enterprise software. Recorded videos are tagged to the transaction events in the Falco Enterprise system.

System Configuration

Hardware Specification

1. Intel Pentium IV (2.8GHz 32 bit MCU) processor of at least 1.8GHz
2. ATX Power Supply (350W or above).
3. 200GB Hard disk with Hard disks Mounting Plate to mount the hard disk.
4. 512MB SD-DDR RAM.
5. Falco PCI 2-wire.
6. Mouse + Keyboard.
7. Video Graphic Adapter Output
8. 10/100 MB Local Area Network (LAN) / TCP/IP
9. Additional Hard Disc for recording (optional).
10. Digital Video Recorder card: 4-channel, 8-channel, 16-channel with 25fps /100fps /480fps

Order Information

ENT-SC-16V (25fps)   : Falco DVR 16 channel with 25fps
ENT-SC-16V (100fps) : Falco DVR 16 channel with 100fps
ENT-SC-16V (200fps) : Falco DVR 16 channel with 200fps
ENT-SC-16V (480fps) : Falco DVR 16 channel with 480fps